SAS/op/proc/forks/op manuals/Ex/EXTREME MANUAL
v13
.pub 2/24/2019
Page 15
© 2014-2019 S.A.S. of Luxemburg, LLC.
PREVENTIVE MAINTENANCE (PAGE 15)
SAS™ EXTREME™ TORQUE INTERVALS
S.A.S. of Luxemburg, LLC. 133 Center Drive Hwy 54, PO Box 260, Luxemburg, WI 54217 USA
Phone: 920-845-2307
1-877-SAS-FORK
Fax: 920-845-2309
Web: www.sasforks.com
Set attachments on ground, turn off excavator, depressurize hydraulic supply to attachments, stay clear of pinch points during
greasing. Safe & proper daily maintenance will help ensure long term performance and prevent failures. Failure to follow pre-
ventive maintenance guidelines can result in equipment failure resulting in injury or property damage.
√
Bolt
√
C Clip
√
Pin
JAWS, WIRE STRIPPER & HOLD DOWN ARM PATENTED
Re-Torque interval chart:
Frequency after first 100 hours of operation & every 500 hours thereafter.
Visual Inspections:
Frequency daily, pre-operation inspection (or every 10 operating hours)
√ Bolt
√ Pin
√
Bolt
√
C Clip
√
Pin
√
Bolt
√
C Clip
√
Pin
√ Bolt(s)
√ Pin
√ Bolt(s)
√ Pin
√ Bolt(s)
√ Pin
√ Bolt(s)
√ Pin
√ Bolt
√ Pin
√ All Fasteners
Ref.
Location
Torque Spec
Inspection
# Bolts
Wrench Size
500
10 100
Bolt
Item
No.
A
Stick mount bolts
500 ft-lbs.
18
1 - 1/2”
7&10
B
Stick large hoses
70-78 ft-lb
Leaks & condition
4
1 - 3/8”
C
Stick small hose
50-56 ft-lb
Leaks & condition
1
1 - 1/16”
D
Hydraulic motor
4
80 ft-lb
3/4”
8
E
Hydraulic motor cover
160 ft-lb
2
15/16”
6
F.1
Slewing ring
35
160 ft-lb
15/16”
5
F.2
Slewing ring
36
160 ft-lb
15/16”
50
G
Side service covers
Hand tighten
2 & 2
15/16”
9
H
Cylinder hoses
4 fitgs 46-56 ft-lb
30mm:1-3/16” Leaks & condition
I
Cylinder service cover 4 & 4
Hand tighten
9/16”
J
Bolts, clip & pin (head) 5
Hand tighten
15/16”
Bolts & C clip in place
K
Claw tips bolts
10
160 ft-lb
3/8” HEX &
15/16 Socket
L
Hold down bolts & pins 4
Hand tighten
9/16”
Hour Interval
Inside side covers under round yellow cap
