SAS/op/proc/forks/op manuals/Ex/EXTREME MANUAL
v13
.pub 2/24/2019
Page 16
© 2014-2019 S.A.S. of Luxemburg, LLC.
Lubricating the rotating grapple head (For models: SAS EXTREME EX-25 v2 & v3 )
Lubricate the SAS EXTREME Auto Processor rotating grapple head daily. Use this opportunity to closely
inspect the pins and pin retaining hardware and conduct necessary repairs.
Recommended grease
Grease should have excellent water-repulsion durability, antirust capabilities, adhesive abilities and me-
chanical stability.
Grease nipples (zerks) are 1/8” NPT
**operating hours
Lubrication interval chart
Grease nipple
locations
PREVENTIVE MAINTENANCE (PAGE 16)
SAS™ EXTREME™ GREASING
S.A.S. of Luxemburg, LLC. 133 Center Drive Hwy 54, PO Box 260, Luxemburg, WI 54217 USA
Phone: 920-845-2307
1-877-SAS-FORK
Fax: 920-845-2309
Web: www.sasforks.com
Place grapple on firm level surface, turn off machine & avoid pinch points.
√
Bolt
√
C Clip
√
Pin
JAWS, WIRE STRIPPER & HOLD DOWN ARM PATENTED
Rotator grease points; see next page.
√ Bolt
√ Pin
√
Bolt
√
C Clip
√
Pin
√
Bolt
√
C Clip
√
Pin
√ Bolt(s)
√ Pin
√ Bolt(s)
√ Pin
√ Bolt(s)
√ Pin
√ Bolt(s)
√ Pin
√ Bolt
√ Pin
√ All Fasteners
Brand
Grapple Pins
Mobil *
(11/4/2016 Per Eric @ Harlon Oil)
Centaur Moly EP2 *
Mobil
Mobilegrease CM-P
Comparable
Comparable
EXTREME head
Grapple Pins
Quantity of nipples 5 nipples
Every 10 hours**
4 shots grease
Every 40 hours**
4 shots grease
EXTREME hold down
Pivot Pins
Quantity of nipples
4 nipples
Every 10 hours**
2 shots grease
Every 40 hours**
4 shots grease
Grease
Grease
