SAS/op/proc/forks/op manuals/Ex/EXTREME MANUAL
v13
.pub 2/24/2019
Page 27
© 2014-2019 S.A.S. of Luxemburg, LLC.
SAS
PATENTED
JAWS
EX-25 v1 PARTS DIAGRAM (PAGE 27)
SAS™ EXTREME™ AUTO PROCESSOR
SERIAL NUMBERS F4627
& (F4908 claws only)
P.3
P.4
Pin Type
DESCRIPTION
QTY
PART NUMBER
[N] CLAW CYLINDER (Special order with 2” diameter pins)
1 HY-CYL-5.0X11.25-4K
N.1 N/A CYLINDER SEAL REBUILD KIT
1 N/A
N.2 N/A CYLINDER PIN BUSHING…………………………………………………… 2 N/A
[O]
CLAW ASSEMBLY (non-replaceable tip) (FASTENED WITH 2 PINS: R1, O1)
1 EP-EX25-CLL-V1
O.1 CYLINDER ROD END CLAW PIN - LH—S/N F4627 & F4908 CLAWS ONLY 1 1902-004-V1
O.2a BOLT…………………………………………………………………………………... 1 WBOLT 0.500X4.50 GR8
O.2b NUT
1 WNUT 0.500-13-NY
O.3 BUSHING (FOR CLAW MAIN PIVOT)…………………………………………….. 1 W-B2.000X2.500X5.875
O.4 GREASE ZERK - SMALL - 1/4-28 UNF
2 WGREASE ZERK 1/4-28
[P]
CLAW ASSEMBLY (non-replaceable tip) (FASTENED WITH 3 PINS: R1, P1, P2)1 EP-EX25-CLR-V1
P.1 PIN ON CLAW CYLINDER BASE- RH—S/N F4627 & F4908 CLAWS ONLY 1 1902-007-V1
P.2 PIN ON PARALLEL BAR ………..- RH—S/N F4627 & F4908 CLAWS ONLY 1 1902-007-V1
P.2 PIN ON PARALLEL BAR ………..- RH–-S/N F4627 & F4908 CLAWS ONLY 1 1902-008-V1
P.3 FASTENERS: BOLT FOR PINS ……….
2 WBOLT 0.375X4.25 GR8
P.4 NUTS FOR PINS ………
2 WNUT 0.375-16-GR8-NY
P.5 BUSHING (FOR CLAW MAIN PIVOT)……………………………………………. 1 W-B2.000X2.500X5.875
P.6 GREASE ZERK - SMALL—1/4-28 UNF
1 WGREASE ZERK 1/4-28
[Q] PARALLEL BAR ASSEMBLY
1 EP-EX25-PBR-V1
[R]
CLAMP BODY ASSEMBLY
1 EP-EX25-CLAMPBODY-V1
R.1 MAIN CLAW PIVOT PIN
2 1901-011-V1
R.2 RETAINER BOLT FOR PINS
2 WBOLT 0.625X5.00 GR8
R.3 NUTS FOR RETAINER BOLTS
2 WNUT 0.625-11-GR8-NY
[S] HYDRAULIC ROTATOR options:
S.
v1 KINSHOFER ROTATOR MODEL RD20A500BA2 (DUAL MOTORS)
1 HR-ROTAR-K-770058341
S.1 v1 KINSHOFER HYDRAULIC COVER
W/GREASE ACCESS (S/N F4968 & DOWN)
1 1901-029
S.2 v1 KINSHOFER HYDRAULIC COVER (S/N F4968 & DOWN)
1 1901-024
S.
v2 ROTOBEC ROTATOR MODEL RLP-902 (SINGLE ROTATE MOTOR)
1 HR-ROTAR-R-7002-4803
S.x v2 ROTOBEC HYDRAULIC MOTOR COVER ASSEMBLY (NOT SHOWN)
1 HR-R-07001-7090
[T]
STICK MOUNT ASSEMBLY
1 VARIES WITH MACHINE
