SAS/op/proc/forks/op manuals/Ex/EXTREME MANUAL
v13
.pub 2/24/2019
Page 3
© 2014-2019 S.A.S. of Luxemburg, LLC.
TABLE OF CONTENTS (PAGE 3)
SAS™ EXTREME™ AUTO PROCESSOR
Serial Number Location Reference…………………………………………….
Page 2
Limited intended use of this equipment………………………………………..
Page 3
Introduction Letter………………………………………………………………..
Page 4
General Safety Guidelines……………………………………………………...
Page 5 - 7
Specific Notices CE ……………………………………..
Page 7
Emergency STOP Function…………………………….
Page 7
Safety Labels ……………………………………...…….
Page 8
Installation Guidelines……………………………………………………………
Page 9 - 14
Optional Hold Down Hinge & Hydraulics Parts List
Page 12 –13
Pressure & Flow Settings Required…………………….
Page 14
Maintenance: …….. Torque intervals ………………………………………….
Page 15
Grease grapple …………………………………………..
Page 16
Grease rotator ………………...………………………….
Page 17
Accumulator……………………………………………….
Page 18
Pre-operation: ……. Checklist guide …………………………………………….
Page 19
Daily checklist………..………….…………………………
Page 20
Determining Lift Capacity…………………………………
Page 21-22
Operation Guidelines …………………………………………………………….. Page 23
EX-25 & EX-35 SAS EXTREME Replaceable Claw Tips……………………..
Page 24
EX-25 v3 SAS EXTREME Parts Diagram (Serial Number SAS F5343 & Higher) Page 25
EX-25 v2 SAS EXTREME Parts Diagram (Serial Number SAS F4775-F5330) Page 26
EX-25 v1 SAS EXTREME Parts Diagram (Serial Number SAS F4627 only)
Page 27
EX-25 v2 & V3 Rotator RLP-902 Parts (Serial Number SAS F4989-F5687)
Page 28 - 37
EX-25 v1
Rotator RD20A500BA2 (Serial Number SAS F4968 & Lower) Page 38 - 39
EX-35 v2 SAS EXTREME Parts Diagram (Serial Number SAS F5453-F5720)
Page 40
EX-35 v1 SAS EXTREME Parts Diagram (Serial Number SAS F5188 only)
Page 41
EX-35 Lg Rotator RGP-1302 Parts (S/N: F5188, F5453, F5545, F5685, F5720) Page 42 - 54
Wire Stripper………………………………………………………………………..
Page 55
Optional
Electronics Parts Guide ………………………………………………..
Page 56 - 58
Limited warranty……………………………………………………………………
Page 59
CE Declaration of Conformity……………………………………………………
Page 60
LIMITED INTENDED USE OF THIS EQUIPMENT:
SAS EXTREME™ Auto Processor excavator attachment is designed break recyclable scrap materials from
end of life cars and trucks. Materials removed from cars and trucks will be damaged. Some excavators may
require modification to pressures, valves, cylinders, reinforcement of x-frame, or other modifications for installa-
tion and to operate in a desirable manner. This attachment is considered a non-OEM attachment and has not
been approved by any specific excavator manufacturer. Customer is responsible to read the excavator’s manu-
al and warranty documents, if any, and identify any impact installation and use of this attachment may have on
the excavator’s warranty. Read this manual completely before installation or use.
S.A.S. of Luxemburg, LLC. 133 Center Drive Hwy 54, PO Box 260, Luxemburg, WI 54217 USA
Phone: 920-845-2307
1-877-SAS-FORK
Fax: 920-845-2309
Web: www.sasforks.com
