SAS GRO-ECO Technical - Start - Up Documentation Download Page 21

 

 

 

 

 

 

21

 

 
 

In  order  to    recycle    the  boiler  worn  device  deliver  to    specialized  recycling  unit, 
according to detailed regulations being in  force in the country of  destination.  

 

 
 
 

 

1. Manufacturer  grants  warranty for proper functioning  of the  heating  boiler SAS 

GRO-ECO, what is confirmed with the stamp of  factory.                                                                                                                          

 

2. Manufacturer grants warranty for the period covering

  

the boiler installed and 

operated  according  to  all  terms  and  recommendations  included  to  Technical -
Start-Up Documentation (TSD).                      

 

3. A buyer gets together with terms of warranty hereby Technical-Start-Up-

Documentation (TSD),  which is laid down rules for the proper operation and safe 
exploitation of the  heating  boiler.  Hereby documentation (TSD) must be reading 
careful and it is obligatory. 

 

4. Warranty terms are binding from the date of the purchase for the period of:                                                                                    

a. 5 years * for efficient functioning of the boiler,  
b. 2 years on electronics and automation components mounted on the boiler and 

produced by other manufacturers:  

 controller 

 blowing fan 

 safety valve 

 automatic fuel delivery system (details of the manufacturer warranty) 

 

5. Warranty does not cover consumable items:  

 sealant (rope)  

 capacitor 

 sensors                                                                                                                                            

 

6. Manufacturer is obligated to carry out the charge free repair under warranty in time 

period of 14 days starting from the date of application (done by user).                                                      

 

7. Boiler’s repair, the construction or insulation alterations made by user or other 

third parties – will cause the warranty to be invalid.  

 

8. Application of reclamation should be addressed at manufacturer.   

 

 

9.  Boiler  replacement  realized  by  manufacturer  is  only  possible  based  o  expert 

opinion, that repair is not workable. 

 

10. If the advertiser does not allow double-warranty repairs, despite the willingness of 

the  guarantor  to  comply  with  it,  is  deemed  to  have  resigned  from  the  advertiser 
claims contained in the application of reclamations.                                                                                                             

 
 
_________________________________________________ 

*

boilers of power 48 kW and higher are cover with 24-months warranty 

 

10.

 

BOILER’S RECYCLING

 

11.

 TERMS OF WARRANTY 

 

Summary of Contents for GRO-ECO

























Reviews: