42
Taste
p
/
Universal-
Taste*)
Taste
t
/
Steueraus-
gang 1*)
Taste
q
/
Steueraus-
gang 2*)
Taste
v
/
Steueraus-
gang 3*)
Taste
c
/
Steueraus-
gang 4*)
– Disconnect the following cables:
Power supply (I); weighing system (K);
weight application mechanism (L); display and control unit (M).
– You can now remove the main PCB.
– Follow these steps in reverse order to install the new PCB.
– The balance must now be programmed (if the PCB installed is not pre-pro-
grammed).
Note:
After programming the balance, check the linearity and span.
Pin Assignments
Female Interface Connector:
25 position D-Submini, DB25S, with screw lock hardware for cable gland
Note:
Warning When Using Pre-wired RS-232 Connecting Cables:
RS-232 cables purchased from other manufacturers often have incorrect pin
assignments for use with Sartorius balances. Be sure to check the pin assign-
ments against the chart on the right before connecting the cable, and discon-
nect any lines marked “Internally Connected” (e.g., Pin 6). Failure to do so
may damage or even or even completely ruin your balance and/or peripheral
device.
Pin Assignments:
Pin 1:
Signal Ground
Pin 2:
Data Output (TxD)
Pin 3:
Data Input (RxD)
Pin 4:
Signal Return (TxD/RxD)
Pin 5:
Clear to Send (CTS)
Pin 6:
Internally Connected
Pin 7:
Internal Ground
Pin 8:
Internal Ground
Pin 9:
Reset _ IN**)
Pin 10:
– 12V
Pin 11:
+ 12V
Pin 12:
Reset_Out**)
Pin 13:
+ 5V
Pin 14:
Internal Ground
Pin 15:
Pin 16:
Pin 17:
Pin 18:
Pin 19:
Pin 20:
Data Terminal Ready (DTR)
Pin 21:
Supply Voltage Ground “COM”
Pin 22:
Not Connected
Pin 23:
Not Connected
Pin 24:
Supply Voltage Input +15...25V
Pin 25:
+ 5V
*) = See “Additional Functions” in the Installation and Operating Instructions for information
on changing the pin assignments
**) = Hardware restart
M
L
K
I
SAT6856.EPS
AMP25p-v.EPS
Summary of Contents for Master Pro LA12000P
