Leveling the Balance/Scale
Purpose:
– To compensate for unevenness at the place of
installation
Always level the balance/scale again any time after
it has been moved to a different location. Only the
2 front feet are adjusted to level the balance/scale.
§
Retract the two rear feet (only on models with
a rectangular weighing pan).
§
Turn the 2 front feet as shown in the diagram until
the air bubble is centered within the circle of the
level indicator.
> In most cases this will require several adjustment
steps.
§
On models with a rectangular weighing pan: extend
the 2 rear feet until they touch the surface on which
the balance/scale rests.
Anti-theft Locking Device
§
To secure the balance/scale at the place of
installation, fasten a chain or a lock to the lug
located on the rear panel of the balance/scale.
10
Summary of Contents for ED124S
Page 3: ...Fran ais page xx Espa ol page xx Italiano page xx 2...
Page 60: ...59 C...
