4. Preparation and Inflation of the
CultiBag RM 600
4.1
Unpacking the CultiBag RM 600
Risk of damaging the sterile cultivation chamber!
Remove the outer protective plastic film carefully. Take extra care when using sharp
objects that may puncture the bag film.
Place the sterile disposable CultiBag RM 600L bioreactor chamber in the middle of
the rocking table before removing the protective plastic foil!
Remove the sterile disposable CultiBag RM 600L bioreactor from the protective
plastic foil as delivered.
Place the sterile disposable CultiBag RM 600L bioreactor chamber on the
rocking table.
4.2
Mounting the CultiBag RM 600L on the Rocking Table
Make sure, the heating sections are not switched on before touching the rocking
table. Rocking table might be hot.
Do not use any tools to mount the CultiBag RM to avoid damaging the bag.
Avoid any folds at the lower side of bag.
Do not start rocking motion while the cover of rocking table is opened. Risk of injury.
Check visually that the bag is properly installed. Install the bag rods completely in
the guides.
18
Preparation and Inflation of the CultiBag RM 600
NOTICE
NOTICE