3.3
Transportation, Unpack Equipment
3.3.1 Transportation
1. If
BIOSTAT
®
CultiBag RM 600 is moved on its wheels; take its weight into your
consideration. Take precaution if moved up or down on ramp and make sure the
ground is strong enough to support the weight.
2. If lifted by fork lift or pallet truck, please ensure BIOSTAT
®
CultiBag RM 600 is
lifted up by its frame. Lift up at rear or front side. Lift up at side towards control
cabinet. If required, fix at fork. Please ensure you do not damage cables.
Only lift with fork lift or pallet truck. Please do not use chain blocks or similar
device. Please lift only at the lower frame.
3. BIOSTAT
®
RM Control Tower is mounted at pallet. Only transport with fork lift
or pallet truck.
4. Keep equipment dry while transportation or storage.
Do not lift at the rocking table or at the control cabinet.
Note the weight and the dimensions of all devices. Use appropriate transport
carriers.
Do not lift the Rocker 600 with the BIOSTAT
®
RM Control Tower mounted
and | or with liquid containing CultiBag RM inside.
3.3.2 Place at Final Destination
1. Move the BIOSTAT
®
CultiBag RM 600 to the final place where it will be installed.
Lock all wheel breaks. Please make sure the rocking table is placed in horizontal
position on an even surface.
Take care when moving onto inclined plane. Take it’s heavy weight into your
consideration. Do not move the BIOSTAT
®
CultiBag RM 600 mounted with liquid
containing CultiBag RM inside.
3.3.3 Unpack Equipment
1. Remove the carton closure from BIOSTAT
®
CultiBag RM 600. Sink the BIOSTAT
®
CultiBag RM 600 carefully from the pallet on a horizontal floor. A fork lift may
be used. Lift only at the lower frame. Check that the equipment is intact and
complete.
2. Unpack BIOSTAT
®
RM Control Tower carefully. Avoid any damage to front
mounted air flow meters and connectors.
Getting Started
15
NOTICE
NOTICE