Sapphire Audio APEX 570 Operation And Service Manual Download Page 36 | Manualshive

Page: 36 / 118

background image

SECTION THREE: USING YOUR CLEANING SYSTEM

P a g e

| 31

108268/49-053 Rev M LEGEND BRANDS MODEL APEX 570

7.

BYPASS VALVE

This valve allows the operator to quickly reduce water temperature by bypassing hot water to the waste tank.
Turning the valve counterclockwise opens the valve for cooling. Turning clockwise closes the valve.

8.

OUTLET PRESSURE REGULATOR

The pressure regulator sets the pressure of the solution system. This spring loaded valve can be adjusted up or
down. The pressure is increased by turning the valve clockwise, or reduced by turning the valve
counterclockwise. This valve must be maintained in accordance with the maintenance table in this manual.

9.

VACUUM INLET HOSE PORTS

The vacuum inlets are where you connect your vacuum hoses. The Apex 570 has one 2 inch and one 2-1/2 inch
ports. Always cap unused ports to maintain proper vacuum levels.

«
...
34
35
36
37
38
...
»

Summary of Contents for APEX 570























































































































Reviews:

No comments

Related manuals for APEX 570

MicroVersaTrip Plus

Brand: GE Pages: 20

MicroVersaTrip Plus

Brand: GE Pages: 2

Brand: GE Pages: 252

Brand: Balanced Body Pages: 12

Brand: Eagle Pro Pages: 6

Brand: GE Pages: 10

Brand: JB-Lighting Pages: 60

Brand: Velocitek Pages: 81

ABS-Lock X-Flat

Brand: ABS Pages: 8

ABS-Lock X-DURCH

Brand: ABS Pages: 8

Brand: ABS Pages: 8

Brand: B. Braun Pages: 2

Aesculap Neurosurgery

Brand: B. Braun Pages: 13

Aesculap AdTec mini

Brand: B. Braun Pages: 2

Brand: B.Well Pages: 2

Brand: B. Braun Pages: 55

BA Ultimate LED

Brand: B.A. International Pages: 234

Brand: Vahle Pages: 96

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands