SECTION FOUR
–
SERVICE AND MAINTENANCE
P a g e
| 40
108268/49-053 Rev M LEGEND BRANDS MODEL APEX 570
SECTION FOUR: SERVICE AND MAINTENANCE
Apex 570 MAINTENANCE CHART
DAILY MAINTENANCE
Engine
Check engine oil level. (2) Fill to proper level.
Vacuum Pump
Check vacuum pump oil level. Fill to proper level. Do not overfill. (1)
Vacuum Pump
Spray silicone or Teflon/PTFE based lubricant into the lubrication cup for 10 seconds.
Pressure Pump
Check water pump oil level. (3) Fill to proper level.
Vacuum Inlet Filters
Inspect filters in the recovery tank, clean and or replace if required. (1)
Strainer Basket
Empty and clean stainless steel basket in the recovery tank.
Vacuum Hoses
Rinse with fresh water.
Waste Pump-Out
(Optional equipment) Inspect and remove any debris or sediment. (1)
WEEKLY MAINTENANCE
Float Switch(es)
Clean and inspect float switch(es) in the waste tank.
Visual Inspection
Check for leaks around the unit, check wires and hoses for wear.
MONTHLY MAINTENANCE
Engine
Check air cleaner for damaged, dirty or loose parts.
Engine
Inspect drive belts for wear. Replace as needed.
Engine Air Cleaner
Check vehicle engine air cleaner. Clean or replace as necessary.
Battery
Check fluid level and battery terminals. (1)
Thermal Well
Lubricate diverter shaft with anti-seize
Check Valve Strainer
Clean and remove debris (1, 4)
Check fasteners
Check fastener tightness on all components. Tighten as needed.
QUARTERLY MAINTENANCE
Inlet Pressure Regulator Clean and remove any debris. (1, 4)
YEARLY MAINTENANCE
Check-Valve
Check seat for abnormal wear or debris. Replace as needed.
To maximize the operating life and performance, use only recommended oils, filters and greases.
(1) Or as often as required.
(2) Change engine oil and oil filter after
first 50 hours
of operation and then
every 200 hours
.
(3) Change water pump crankcase oil after
first 50 hours
of operation.
(4) Inspect after
first week
of operation, and remove any debris present. Inspect again after
2 to 4 weeks
.
Summary of Contents for APEX 570
Page 2: ......
