SECTION ONE: GENERAL INFORMATION
P a g e
| 5
108268/49-053 Rev M LEGEND BRANDS MODEL APEX 570
1.
DO NOT
damage the vehicle in any way during the installation. Avoid component or hose contact with moving
parts, hot surfaces, brake lines, fuel lines, catalytic converters, exhaust pipes, mufflers, rotating parts or sharp
objects.
2.
DO NOT
exceed the vehicle
’
s payload capacity. This will prevent unsafe or hazardous driving conditions. Before
installing any components into the vehicle, check with the vehicle manufacturer for the Gross Vehicle Weight
Rating (GVWR). GVWR is the maximum allowable combined weight of the vehicle, including all passengers, fuel,
fluids, tools and cargo.
Example:
If the GVWR for a vehicle is 9600 lbs. and the vehicle has a base curb weight of 6400 lbs., this leaves a
payload capacity of 3200 lbs. (GVWR - Curb Weight = Payload Capacity).
3.
Always keep your vehicle clean and orderly. Tools and accessories must be securely stowed while driving the
vehicle.
4.
Ensure that you have received proper training and are familiar with the start-up and shut-down procedures prior
to operation.
5.
DO NOT
alter or modify your
Model Apex 570
in any way. Use only replacement parts authorized by
Sapphire
Scientific
. Modifications or use of unapproved parts could create a hazard and will void your warranty. This
includes the use of any open ended hoses.
6.
Failure to apply preventative measures towards freezing can result in system failure and loss of warranty on
affected parts. Water freezes at 32° F and 0° C.
READ AND SAVE THESE INSTRUCTIONS
Summary of Contents for APEX 570
Page 2: ......
