SECTION TWO: INSTALLATION
P a g e
| 14
108268/49-053 Rev M LEGEND BRANDS MODEL APEX 570
FASTENING DOWN THE UNIT AND WASTE TANK
Prior to drilling any holes in the vehicle floor, ensure that while drilling, you will not damage the fuel tank, fuel lines, or
any other vital components which could affect the safety or operation of the vehicle.
A. The console mounting rails and waste tank mounting holes will serve as a template. Drill eight (8) to ten (10)
13
⁄
32
in.
diameter holes for the console and six (6) to eight (8)
13
⁄
32
in. diameter holes for the waste tank.
B. Using the provided mounting hardware kit:
Insert grade 5, 3/8-16 × 4 in. hex head cap screws with flat washers through the console and waste tank mounting holes.
The two 5/16-18 x 6 in. hex head cap screws are provided if the unit is being installed into a Ford Transit. See your
Transit installation guide for more information.
Install the provided mounting plates underneath the vehicle floor. Use the larger plates where space is available.
Screw the provided 3/8-16 hex head lock nuts on to the mounting bolts and tighten until the console and waste tank are
firmly attached to the vehicle floor.
!
Do not alter or modify your
570SS
in any way. Use only replacement parts authorized by
SAPPHIRE SCIENTIFIC
, Inc. Modifications or use of unapproved parts could create a hazard and will void your warranty.
Contact your authorized Sapphire dealer for assistance.
Summary of Contents for APEX 570
Page 2: ......
