Sanyo PLC-XU300A, Owner'S Manual

Page: 27 / 168

27
Choose Computer 1(RGB) or Computer 1(Scart) by pressing the INPUT button on the top control or press the
COMPUTER 1 button on the remote control.
Before using INPUT button, correct input source should be selected through Menu operation as described
below.
1
Input Menu
2
3
Input Source Selection (Computer 1: RGB / Component / RGB(Scart) )
Computer Input
COMPUTER 1 button
Note:
When the Input Search function is set to On1 or On2 in
the Auto setup function, the input signal will be searched
automatically (p.45).
Computer
1
Top Control
Remote Control
Direct Operation
Menu Operation
Press the MENU button to display the On-Screen
Menu. Use the Point
54
buttons to select Input and
then press the Point or the SELECT button.
Use the Point 54 buttons to select Computer 1 .
When Computer 1 is selected, press the Point
button to access the submenu items. Use the Point
54
buttons to select the RGB input source and then
press the SELECT button.
Computer 1(RGB)
Computer 1(Scart)
Video
Computer 2(RGB)
S-video
INPUT button
Computer 1(RGB) /
(Component) / (Scart)