Sanyo PLC-XU300A, Owner'S Manual

Page: 148 / 168

12
Chapter 3 Basic Operation
Setting up the warning value
PJ Network Manager provides a function to
display the alert when the use time of the set-
ting item reaches a specified setting time. The
available setting items (use time) are depend-
ing on the target equipment.
1
Select a target on the status list with right click.
When setting multiple targets together, select
targets with pressing "Shift" or "Control" key.
2
Select Warning value setting on the popup
menu. The setting window will appear as
the right figure.
3
Check Warning time check box. The setting
items are activated. Select a setting item and click
Edit button. Another setting window appears.
4
Enter the threshold value of selected item and
then click
OK button. The setting window will dis-
appear.
5
Set up warning value for remaining items if avail-
able and then click
OK button. The setting win-
dow will disappear.
To disable the warning value, clear Warning time check box.
When selecting multiple targets, the value set to the lowest target on the status list is displayed as
the current setting time. Up to 99,999 hours can be set for the use time. The warning value is stored
in the management file.
Starting target monitoring
1
Click button on the tool bar to start monitoring the target.
2
PJ Network Manager starts polling the target in a sequential from the top of the status
list and displays the results on the status list.
(Example of the set up window)