Sanyo PLC-XU300A, Owner'S Manual

Page: 22 / 168

22
Menu Bar
For detailed functions of each menu, see “Menu Tree” on pages 68-69.
D
J
8
E
G
L
H
<
Main Menu Sub-Menu
B
8
Image select
For computer source, used to select an image mode from among Dynamic , Standard , Real , Blackboard(Green) ,
Colorboard and image 1 - 4 (p.33).
For Video source, used to select an image mode among Dynamic , Standard , Cinema , Blackboard(Green) , Colorboard
and Image 1- 4 (p.40).
E
Image adjust
For computer source, used to adjust computer image [ Contrast , Brightness , Color temp. , White balance (R/G/B),
Sharpness and Gamma ] (pp.34-35).
For Video source, used to adjust picture image [ Contrast , Brightness , Color , Tint , Color temp. , White balance (R/G/
B) , Sharpness , Gamma , Noise reduction and Progressive ] (pp.41-42).
J PC adjust
Select Fine sync , Total dots , Horizontal , Vertical , Clamp , Display area H , Display area V and Auto PC adj. to adjust
the parameters to match with the PC input signal format (p.30-32).
G
Screen
For computer source, used to adjust size of the image [ Normal , True , Wide , Full , Custom and Digital zoom +/– ]
(pp.35-36). For Video source, used to set size of image [ Normal , Wide and Custom ] (p.43).
D Input
Used to select an input source from Computer 1 , Computer 2 , Video or S-video .
(pp.27-28,37-38).
L Sound
Used to adjust the volume or mute the sound (p.24).
< Information
Display the input source information: Input , H-sync freq. , V-sync freq. , Screen , Language , Lamp status , Lamp
counter , Power management , Key lock , PIN code lock and Remote control (p.58).
Guide
The key operation is displayed.
H Setting
Used to set the projector’s operating configurations (pp.44-57).
B
Network
See owner’s manual of “Network Set-up and Operation”.
Basic Operation