Sanyo PLC-XK3010 Owner'S Manual Download

Page: 20 / 77

TO MAINTAIN THE LIFE OF THE LAMP,

ONCE YOU TURN THE PROjECTOR ON,

WAIT AT LEAST FIVE MINUTES BEFORE

TURNING IT

OFF .

Power off?

disappears after 4 seconds.

Turning Off the Projector

Press the ON/STAND-BY button on the top control

or on the remote control, and

Power off?

appears

on the screen.

Press the ON/STAND-BY button again to turn off the

projector. The POWER indicator starts to blink red,

and the cooling fans keep running. (You can select

the level of fans’ quietness and speed. See “Fan” on

page 55.) At this time, you can unplug the AC power

cord even if the fans are still running.

When the projector has cooled down enough, the

POWER indicator stops blinking and you can turn on

the projector.



Note:

• When the Direct on function is set to

the projector will be turned on automatically

by connecting the AC power cord to an AC

outlet (p.49).

• The running speed of cooling fans is

changed according to the temperature inside

the projector.

• Do not put the projector in a case before the

projector is cooled enough.

• If the WARNING indicator blinks or lights red,

see “WARNING indicator” on page 58.

• While the POWER indicator is blinking, the

lamp is being cooled down and the projector

cannot be turned on. Wait until the POWER

indicator stops blinking to turn on the

projector again.

• The fan rotation will terminate directly if the

AC power cord is unplugged immediately

after the projector is turned off.

• The projector can be turned on after the

POWER indicator turns red. The waiting

time to restart will be shortened when the

normal power-off processing for fan cooling

is completed, compared with the time the AC

power cord is immediately unplugged after

the power-off.

Basic Operation

DO NOT OPERATE THE PROjECTOR

CONTINUOUSLY WITHOUT REST.

CONTINUOUS USE MAY RESULT IN

SHORTENING THE LAMP LIFE. TURN OFF

THE PROjECTOR AND LET STAND FOR

ABOUT AN HOUR IN EVERY 24 HOURS.



Note:

• When using the Direct OFF function, you can

not restart the projector immediately after

the power is disconnected. If the external

power supply is suddenly cut off, the fans

stop immediately. The lamp remains high

temperature and needs to be cooled.

You can disconnect the power cord from the wall outlet

or turn off the breaker even during projection without

pressing the ON/STAND-BY button.

Direct OFF Function

Summary of Contents for PLC-XK3010














































































Search results

Summary of Contents for PLC-XK3010

Reviews:

Related manuals for PLC-XK3010

Brands by name

Popular brands

Sanyo PLC-XK3010, Owner'S Manual

Search results

Summary of Contents for PLC-XK3010

Reviews:

Related manuals for PLC-XK3010

Brands by name

Popular brands