Sanyo PLC-XK3010 Owner'S Manual Download

Page: 6 / 77

Safety Instructions

Openings in the cabinet are provided for ventilation. To

ensure reliable operation of the product and to protect it

from overheating, these openings must not be blocked

or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using

or installing the projector, the following precautions

should be taken.

– Do not put any flammable object or spray can near

the projector, hot air is exhausted from the ventilation

holes.

– Keep the exhaust vent at least 3’ (1 m) away from

any objects.

– Do not touch a peripheral part of the exhaust vent,

especially screws and metallic parts. These areas will

become hot while the projector is being used.

– Do not put anything on the cabinet. Objects put on the

cabinet will not only get damaged but also may cause

fire hazard by heat.

– Make sure that there is no object under the projector

to prevent from covering the bottom openings.

Cooling fans are provided to cool down the projector.

The fans’ running speed is changed according to the

temperature inside the projector.

Moving the Projector

When moving the projector, retract the adjustable foot

to prevent damage to the cabinet and use a suitable

carrying case.

When this projector is not in use for an extended

period, put it into a suitable case to protect the

projector.

Air Circulation

Exhaust Vent

(Hot air exhaust)

Do not tilt the projector more than 30

degrees from above and below.

Do not point the projector up to

project an image.

Do not point the projector down to

project an image.

Do not put the projector on either side

to project an image.

Install the projector properly. Improper installation may

reduce the lamp life and cause a fire hazard.

Installing the Projector in Proper

Position

Do not tilt the projector more than 0

degrees from side to side.

20°

30°

CAUTION IN CARRYING OR

TRANSPORTING THE PROjECTOR

– Do not drop or bump the projector, otherwise damages

or malfunctions may result.

– When carrying the projector, use a suitable carrying

case.

– Do not transport the projector by courier or any other

transport service in an unsuitable transport case. This

may cause damage to the projector. For information

about transporting the projector by courier or any other

transport service, consult your dealer.

– Do not put the projector in a case before the projector is

cooled enough.

Air Intake Vent

(Filter)

Summary of Contents for PLC-XK3010














































































Search results

Summary of Contents for PLC-XK3010

Reviews:

Related manuals for PLC-XK3010

Brands by name

Popular brands

Sanyo PLC-XK3010, Owner'S Manual

Search results

Summary of Contents for PLC-XK3010

Reviews:

Related manuals for PLC-XK3010

Brands by name

Popular brands