Sanyo PLC-XK3010 Owner'S Manual Download

Page: 69 / 77

Check the indicators for projector condition.

• • • green.

• • • red

• • • off

• • • blinks green.



When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow.

When this indicator lights yellow, replace the projection lamp with a new one promptly. (pp. 55, 61)

The projector is off. (The AC power cord is unplugged.)

The projector is in stand-by mode. Press the ON/STAND-BY

button to turn on the projector.

Projector Condition

POWER

red/

green

Indicators

LAMP

REPLACE

yellow

WARNING

red



The projector is preparing for stand-by or the projection lamp

is being cooled down. The projector cannot be turned on

until cooling is completed and the POWER indicator stops

blinking.

The temperature inside the projector is abnormally high. The

projector cannot be turned on. When the projector is cooled

down enough and the temperature returns to normal, the

POWER indicator stops blinking and the projector can be

turned on. (The WARNING indicator keeps blinking.)

The projector detects an abnormal condition and cannot

be turned on. Unplug the AC power cord and plug it again

to turn on the projector. If the projector is turned off again,

unplug the AC power cord and contact the dealer or the

service center for service and checkup. Do not leave the

projector on. It may cause an electric shock or a fire hazard.



The projector is in the Power management mode.



The projector has been cooled down enough and the

temperature returns to normal. When turning on the

projector, the WARNING indicator stops blinking.



The projector is operating normally.



Indicators and Projector Condition

• • • blinks red.

Appendix

Summary of Contents for PLC-XK3010














































































Search results

Summary of Contents for PLC-XK3010

Reviews:

Related manuals for PLC-XK3010

Brands by name

Popular brands

Sanyo PLC-XK3010, Owner'S Manual

Search results

Summary of Contents for PLC-XK3010

Reviews:

Related manuals for PLC-XK3010

Brands by name

Popular brands