65
The image is distorted or runs off.
– Check
PC adjust
menu or
Screen
menu and adjust them.
See pages 30-31, 34-35.
PIN code dialog box appears
– PIN code lock is being set. Enter a PIN code (the “134” or numbers
at start-up .
you have set). See pages 19, 53-54.
The Remote Control does
– Check the batteries.
not work .
– Make sure no obstruction is between the projector and remote
control.
– Make sure you are not too far from the projector when using the
remote control. Maximum operating range is 16.4'(5 m).
– Make sure the code of the remote control is conformed to the
projector’s code. See page 5.
– Unlock the Key lock function for the remote control function.
See page 53.
Indicator blinks or lights.
– Check the status of the projector with referring to "Indicators and
projector Condition". See page 69.
The exclamation mark appears
– Your operation is invalid. Operate correctly.
on the screen.
Top control does not work.
– The top control is not available if the top control is locked at
Key lock
under
Security
of SETTING section. See page 53.
Unable to unlock the Logo PIN
– Contact the dealer where you purchased the projector or the service
code lock, Security key lock
center.
or Security PIN code lock.
– The projector detects an abnormal condition. Unplug the AC power cord
and contact the dealer where you purchased the projector or the service
center.
appears on the screen
Appendix
Summary of Contents for PLC-XK3010
Page 77: ...KT8AE ...
