Sanyo PLC-XK3010, Owner'S Manual

Page: 31 / 77

31
Computer Input
Store
To store the adjusted data, select Store and then press
the Point ► or the SELECT button. Move the highlight
to one of the Modes 1 to 10 in which you want to store,
and then press the SELECT button.
Mode free
To clear the stored data, select Mode free and then
press the Point ► or the SELECT button. Move the
highlight to the Mode that you want to clear and then
press the SELECT button.

Note:
• Display area (H/V) cannot be selected when 480i , 575i , 480p , 575p , 720p , 1035i or 1080i is
selected in the PC System Menu (p.8).
• When input computer signal to the projector, PC adjust will become available.
Reset
To reset the adjusted data, select Reset and press the
SELECT button. A confirmation box appears and then
select Yes . All adjustments will return to their previous
figures.
This Mode has stored
parameters.
Values of Total dots , Horizontal ,
Vertical , Display area H , and Display
area V .
Vacant
Press SELECT
button to store the
data.
Press MENU
button to close this
dialog box.
Mode free
Store