Sanyo PJ-Net Organizer POA-PN30, Owner'S Manual

Page: 35 / 84

35
PJ-NET ORGANIZER
OWNER'S MANUAL
ENGLISH
SNMP setting
This product provides a SNMP (Simple Network Management
Protocol) agent function. The SNMP consists of a manager
and agents. The group which communicates information
each other with SNMP is called "Community". There are two
access modes in a community, Refer (read only) and Set
(read- write). This product allows to use Refer (read only) only.
The SNMP message informs the projection monitor status to
an administrator is called "Trap". Click
SNMP Setting on the
main menu and set up each item.
Item Description
Contact .............. Enter user name of the projection monitor etc.
(optional)
Place ..................Enter place of the projection monitor (optional)
Community
name(refer) ........ Enter community name (read only). Default name
is "public".
Item Description
Community name
... Enter community name to send "Trap". Default
name is "public".
Trap address
...... Enter IP address of the SNMP manager computer
to receive "Trap".
PJ information
Trap
SNMP information setting
Trap setting
Initial Setting
SNMP Setting
Information
Timer
Multi Control
Network
Save
E-mail Setting
Setting
Control
PC Adj.
Power & Status
✐
The SNMP agent provided with this product is based upon MIB-2 defined by RFC1213. For private
MIB information, refer to file "Mibinfo/monitorPjNet.mib" in the CD-ROM.
SNMP setting