Sanyo HD5600P series Specifications Download

Page: 79 / 142

Fixing Camera to Black-and-White Video Mode

In [DAY/NIGHT], select “B/W”.

In [INFRARED COMPENSATION], select the focus compensation mode.

Normally, select “INFRARED”. However, if the target gets out of focus, select “VISIBLE”.

VISIBLE:

For natural sunlight or normal lighting

INFRARED:

For near-infrared lighting

You can use the contour compensation function to make the whole video image clearer.

Select “ON” in [APERTURE] and an appropriate correction level in [LEVEL] and click

SET

The higher the correction level, the greater the correction effect.

1 to 15

The configured settings are applied only to the camera views that were specified in [VIEW].

Use the color saturation compensation function to improve the vividness of the color.

In [VIVID COLOR EFFECT], select “ON” and click

SET

The configured settings are applied only to the camera views that were specified in [VIEW].

Working with Administrator Configuration Screens 34/77

Summary of Contents for HD5600P series















































































































































Search results

Summary of Contents for HD5600P series

Reviews:

Related manuals for HD5600P series

Brands by name

Popular brands

Sanyo HD5600P series, Specifications

Search results

Summary of Contents for HD5600P series

Reviews:

Related manuals for HD5600P series

Brands by name

Popular brands