NAMES AND FUNCTIONS OF PARTS
2
English
9
Rear panel
1. VIDEO IN terminals
2. VIDEO OUT terminals
3. AUDIO IN terminal
4. AUDIO OUT terminal
5. MIC IN terminal
6. MAIN MONITOR output terminal
7. MON2 output terminal
8. LAN terminal (10 Base-T or 100 Base-TX)
9. ALARM IN terminals (1 to 6)
These terminals are used to activate alarm recording in
response to operation of an alarm switch on a connected
device.
10. SENSOR ALARM OUT terminals
The terminals are used when motion sensors have been
set (see P.72) to output an alarm signal to a connected
device upon detection of motion.
11. [ALL RESET] button
When the [ALL RESET] button is pressed, the digital video
recorder is reset and the time is returned to its default
setting.
12. Control terminals
13. AC power socket (AC IN)
Insert the supplied power cable securely into this socket.
14. Power cord holder
Secure the power cord to the holder using the cord tie
(accessory) as shown in the illustration.
LAN
AC IN
ALARM IN
SENSOR
ALARM OUT
ALARM OUT
C 1 2 3 4 5 6 C C
C
C R1 R2
C 1 2 3 4 5 6 C
MON2
MAIN
MONITOR
MIC IN
OUT
IN
AUDIO
ALL
RESET
REMOTE
ALARM
FULL
ALARM
RISET
1
2
3
4
5
6
IN
OUT
VIDEO
CL
OC
K SET
IN
CLO
CK SET
OUT
NO
N REC
OUT
WARNI
NG
OUT FULL
EXI
T TI
MER IN
NC
9
10
13
14
12
11
8
7
6
5
4
3
1
2
Pin
Signal
C
Ground
ALARM IN 1
Alarm input No. 1
ALARM IN 2
Alarm input No. 2
ALARM IN 3
Alarm input No. 3
ALARM IN 4
Alarm input No. 4
ALARM IN 5
Alarm input No. 5
ALARM IN 6
Alarm input No. 6
C
Ground
ALARM RESET
Alarm reset input
ALARM FULL
Capacity warning output for alarm
recording area space
Pin
Signal
C
Ground
SENSOR ALARM OUT 1 Output of an alarm signal for Camera No. 1
SENSOR ALARM OUT 2 Output of an alarm signal for Camera No. 2
SENSOR ALARM OUT 3 Output of an alarm signal for Camera No. 3
SENSOR ALARM OUT 4 Output of an alarm signal for Camera No. 4
SENSOR ALARM OUT 5 Output of an alarm signal for Camera No. 5
SENSOR ALARM OUT 6 Output of an alarm signal for Camera No. 6
C
Ground
C
Ground
ALARM OUT
Grouped alarm output
Pin
Signal
C
Ground
REMOTE R1
Remote input 1
REMOTE R2
Remote input 2
CLOCK SET IN
Input of a clock setting signal from an
external device
CLOCK SET OUT
Output of a clock setting signal to an
external device
NON REC OUT
Non-recording output
WARNING OUT
Output of an HDD malfunction error
FULL
Capacity warning output for normal
recording area space
EXT TIMER IN
Signal input from an external timer
NC
- (non connection)
C
Ground
e00_l8hbe_us_7.book Page 9 Friday, April 16, 2004 1:42 PM
