35
RECORD settings
Press the MENU button and enter the password.
The MAIN MENU is displayed, select "
RECORD
" using the
control button (
{|}~
).
To set the resolution for the recordings.
Select "RESOLUTION" using the control button (
{|
)
and select a setting using the control button (
}~
).
To set the recording settings of each channel.
Select an item for each setting using the control button
(
{|
) and select a setting value using the control button
(
}~
).
●
Setting a CHANNEL
Select "CHANNEL" and select a channel.
CH1 - CH16
●
Setting the FRAME RATE (Unit: ips)
Select "FRAME RATE" and select a value.
NTSC:
OFF/1/2/ ... 29/30 (ips)
PAL:
OFF/1/2/ ... 24/25 (ips)
●
Setting the QUALITY
To select "QUALITY" and select the video quality.
Selections:
NETWORK/ECONOMY/BASIC/NORMAL/FINE
●
Setting the RECORDING
To select "RECORDING" and select the recording mode.
• CONTINUOUS (P17)
Recording is performed while this unit is turned on.
• MOTION recording (P17)
Recording is performed as soon as the internal motion
sensor of this unit reacts.
RECORD
RESOLUTION
FULL
CHANNEL
C
FRAME RATE
1 ips
QUALITY
NORMAL
RECORDING
CONTINUOUS
MOTION ZONE
FULL ZONE
MOTION SENSITIVITY
9
ALARM RECORDING
-- -- -- --
PRE RECORD
OFF
POST EVENT RECORD
5 SECONDS
AUDIO
OFF
TIMER SET
1
1
MAIN MENU
RECORD
LIVE
SYSTEM
HDD SET
NETWORK
SERVICE
A
Setting the RESOLUTION
FULL: NTSC:
704 × 480,
PAL:
704 × 576
HALF: NTSC:
704 × 240,
PAL:
704 × 288
QUAD: NTSC:
352 × 240,
PAL:
352 × 288
B
Setting a CHANNEL
Depending on the RESOLUTION settings, the total
FRAME RATE available is limited as follows. If the total
exceeds the limit the FRAME RATE of other channels
cannot be set.
If FULL is selected under resolution setting:
NTSC:
It is possible to select up to a total of 30 frames for
channels 1 to 8 and up to a total of 30 frames for
channels 9 to 16
PAL:
It is possible to select up to a total of 25 frames for
channels 1 to 8 and up to a total of 25 frames for
channels 9 to 16
If HALF is selected under resolution setting:
NTSC:
It is possible to select up to a total of 60 frames for
channels 1 to 8 and up to a total of 60 frames for
channels 9 to 16
PAL:
It is possible to select up to a total of 50 frames for
channels 1 to 8 and up to a total of 50 frames for
channels 9 to 16
If QUAD is selected under resolution setting:
NTSC:
It is possible to select up to a total of 120 frames for
channels 1 to 8 and up to a total of 120 frames for
channels 9 to 16
PAL:
It is possible to select up to a total of 100 frames for
channels 1 to 8 and up to a total of 100 frames for
channels 9 to 16
