Sanyo DSR-2016 Instruction Manual Download

Page: 15 / 74

Pre-operation preparation

Upon turning the power on live video is displayed on the multi-16 screen.

• The screen display can be hidden except for the recording screen display. (P31)

Example of multi-16 screen

Example of single-screen

Operation display

Displayed during live video sequencing.

Displayed during alarm output.

Displayed when the alarm output is set to DISABLE.

Displayed during remote operation by PC.

Remote control display (P41)

Displays the remote control ID currently in
operation.
If no remote ID is set the message "

A(all)

" is

displayed.

Alarm input display

Displayed during motion or external alarm input

(ALARM IN).

Security lock display

Displayed when setting the security lock. (P28)

Hard disk used capacity display

Displays the amount of recording on the hard disk from
0-99%. When the disk is full, "

99%

" changes to "

FULL

When the recording settings are set to overwrite and the
hard disk is full, 99% changes to

which represents

overwriting mode.

Date and time display

This unit manages the recorded videos according to their
date and time. Make sure the correct date and time are set
in the CLOCK SET. (P9)

Camera channel display

CH1 - CH16

Select display/hide channel in "

OSD settings

" in "

LIVE

settings

". (P31)

Recording display

Factory default settings start continuous recordings (C)
automatically once the power is turned on. Change the
recording mode using the menu settings. (P35)

Recording in the continuous mode (CONTINUOUS)

Recording in the real time mode (When pressing the
REC/STOP button)

Recording in the motion detection mode (MOTION)

Recording in the ALARM IN detection mode (ALARM)

Screen display

CH1

2007/05/03 09:04:54

CH6

CH5

CH7

CH8

2007/05/03 09:04:54

CH2

CH10

CH14

CH1

CH9

CH13

CH3

CH11

CH15

CH4

CH12

CH16

7 8

1 2

• If a live video is disconnected, the message "VIDEO

LOSS" is displayed on the monitor.

• If a video signal is not connected to the video input

terminal, the message "NO VIDEO" is displayed on
the monitor.

Summary of Contents for DSR-2016











































































Search results

Summary of Contents for DSR-2016

Reviews:

Related manuals for DSR-2016

Brands by name

Popular brands

Sanyo DSR-2016, Instruction Manual

Search results

Summary of Contents for DSR-2016

Reviews:

Related manuals for DSR-2016

Brands by name

Popular brands