Sanyo DSR-2016 Instruction Manual Download

Page: 2 / 74

Table of Contents

Safety precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii

These precautions must be followed for safety reasons. . . . iii
Follow the points outlined below for proper use . . . . . . . . . . vi

Main Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Main parts replacement timings . . . . . . . . . . . . . . . . . . . . 1

Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Mounting the hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Names and functions of parts . . . . . . . . . . . . . . . . . . . . . . 3

Names of each part and connections. . . . . . . . . . . . . . . . 4

Basic connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

Network connection (LAN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Connecting to the RS-485 control terminal . . . . . . . . . . . . . . . 6

Switching the power on / off . . . . . . . . . . . . . . . . . . . . . . . 7

Switching the power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Switching the power off . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Pre-operation preparation . . . . . . . . . . . . . . . . . . . . . . . . . 8

Screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Setting the television system and the monitor output . . . 9

Setting the clock (CLOCK SET) . . . . . . . . . . . . . . . . . . . . . . 9

Setting the language (LANGUAGE) . . . . . . . . . . . . . . . . . . 11

Setting the RS-485 termination switch
(SANYO SSP side). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Monitoring the camera videos. . . . . . . . . . . . . . . . . . . . . 12

Single-screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Quad-screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Multi-screen display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Camera sequencing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Operating the PTZ camera. . . . . . . . . . . . . . . . . . . . . . . . 14

Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

Real time recording. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

CONTINUOUS recording. . . . . . . . . . . . . . . . . . . . . . . . . . . 17

MOTION recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

ALARM recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

SCHEDULE recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Playing back recorded videos. . . . . . . . . . . . . . . . . . . . . 21

EVENT SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

TIMELINE SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

T/D SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

GO FIRST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

GO LAST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

LOG. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

BOOKMARK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Copying recorded video . . . . . . . . . . . . . . . . . . . . . . . . . 26

Inserting recording media . . . . . . . . . . . . . . . . . . . . . . . . . 26

Copying live videos. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Copying a playback video . . . . . . . . . . . . . . . . . . . . . . . . . 27

Playing back copied videos . . . . . . . . . . . . . . . . . . . . . . . . 27

Setting the security lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

Configuration and function of the Menu settings . . . . . 29

LIVE settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Setting the OSD and OSD CONTRAST . . . . . . . . . . . . . . . 31

Setting the SEQUENCE and SEQUENCE-DWELL TIME. . . . . 31

Setting the EVENT BEEP . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Setting a CHANNEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Alarm input output settings . . . . . . . . . . . . . . . . . . . . . . . . 32

Setting the MON2 (Monitor2)-OUT . . . . . . . . . . . . . . . . . . . 33

RECORD settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Setting the RESOLUTION . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Setting a CHANNEL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Setting the TIMER SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

SYSTEM settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Setting the DVR ID. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

DESCRIPTION confirmation . . . . . . . . . . . . . . . . . . . . . . . . 37

Setting the LOAD DEFAULT . . . . . . . . . . . . . . . . . . . . . . . . 37

Setting an ADMIN PASSWORD . . . . . . . . . . . . . . . . . . . . . 38

Setting the USER PASSWORD. . . . . . . . . . . . . . . . . . . . . . 39

Setting a NETWORK PASSWORD . . . . . . . . . . . . . . . . . . . 39

Setting the DATE FORMAT. . . . . . . . . . . . . . . . . . . . . . . . . 40

Setting the CLOCK SET . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Setting the RS-485 SET. . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Setting the PTZ CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . 40

Setting the LANGUAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . 40

Setting a REMOTE CONTROL ID . . . . . . . . . . . . . . . . . . . . 41

NETWORK settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Setting the PORT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Setting a CLIENT ACCESS . . . . . . . . . . . . . . . . . . . . . . . . . 42

Setting the BANDWIDTH SAVING . . . . . . . . . . . . . . . . . . . 42

Setting the NETWORK TYPE . . . . . . . . . . . . . . . . . . . . . . . 43

Setting the DDNS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Setting the SEND E-MAIL . . . . . . . . . . . . . . . . . . . . . . . . . . 45

HDD SET settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Setting the OVERWRITE . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

FORMAT settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46

Setting the auto delete function. . . . . . . . . . . . . . . . . . . . . 47

SERVICE settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Setting the SAVE SETUP TO A USB . . . . . . . . . . . . . . . . . 48

Setting the LOAD SETUP FROM A USB . . . . . . . . . . . . . . 48

Displays the hard disk information . . . . . . . . . . . . . . . . . . 48

Operations using the Network . . . . . . . . . . . . . . . . . . . . .49

Connection and settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49

Operating environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Installing "Sanyo DVR Utility 2000S" . . . . . . . . . . . . . . . . . . . 49

To uninstall the software. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50

Connecting to this unit . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Main screen structure and function of each part . . . . . .52

Function of the operation panel . . . . . . . . . . . . . . . . . . . . . . . 53

Main screen basic operations . . . . . . . . . . . . . . . . . . . . .54

Switching the display mode of the screen . . . . . . . . . . . . 54

Recording live video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

Freezing the live video . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

The audio is output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Saving images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Operating the PTZ camera . . . . . . . . . . . . . . . . . . . . . . . . . 57

Search mode operations . . . . . . . . . . . . . . . . . . . . . . . . . .58

Searching and playing recorded video . . . . . . . . . . . . . . . 59

Backing up DVR recorded video . . . . . . . . . . . . . . . . . . . . 60

Setup menu settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

General settings (General) . . . . . . . . . . . . . . . . . . . . . . . . . 61

Camera designation settings (Site) . . . . . . . . . . . . . . . . . . 62

Event settings (Event). . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Event log search, view, save (Log View). . . . . . . . . . . . . . 63

Record settings (Record) . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Disk settings (Disk) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Version information (About). . . . . . . . . . . . . . . . . . . . . . . . 64

Part names of the remote control . . . . . . . . . . . . . . . . . .65

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Summary of Contents for DSR-2016











































































Search results

Summary of Contents for DSR-2016

Reviews:

Related manuals for DSR-2016

Brands by name

Popular brands

Sanyo DSR-2016, Instruction Manual

Search results

Summary of Contents for DSR-2016

Reviews:

Related manuals for DSR-2016

Brands by name

Popular brands