Sanyo 1 852 351 85, Technical & Service Manual

Page: 72 / 164

6
Remote Control Unit
Transmitter
1 HR.Timer button
(1-Hour off timer)
FAN SPEED selector button
FLAP button
ON TIME / OFF TIME
setting buttons
CANCEL button
ACL button
(ALL CLEAR)
ON/OFF operation button
Temperature setting buttons (TEMP.)
MODE selector button
ECONOMY button
Transmitter When you press the buttons on the remote control unit, the mark appears
in the display to transmit the setting changes to the receiver in the air
conditioner.
Display Information on the operating conditions is displayed while the remote control
unit is switched on. If the unit is turned off, FLAP setting and FAN SPEED
setting are not displayed.
ON/OFF operation button This button is for turning the air conditioner on and off.
Display
Temperature setting buttons
(TEMP.)
Press the button to increase the set temperature.
Press the button to reduce the set temperature.
MODE selector button Use this button to select AUTO, HEAT, DRY, COOL or FAN mode.
(AUTO) : When this setting is selected, the air conditioner calculates the
difference between the thermostat setting and the room temperature
and automatically switches to the ‘‘COOL’’ or ‘‘HEAT’’ mode as
appropriate.
(HEAT) : The air conditioner makes the room warmer.
(DRY) : The air conditioner reduces the humidity in the room.
(COOL) : The air conditioner makes the room cooler.
(FAN) : The air conditioner works only as a circulation fan.
The temperature setting changes by 1°C each time one of the TEMP. buttons
is pressed.
1 HR. TIMER button
(1-HOUR OFF TIMER)
: When you press this button, regardless of whether the unit is
operating or stopping, the unit operates for one hour and then
shuts down.