13
Instruction Manual for Sanuvair
®
S300
1-888-726-8869
www.sanuvox.com
How to Clean your Product
Maintenance of the unit should be perform at the regular intervals to keep the benefits of the UV air purifier.
For optimal performance, the lamp should be kept free of dust and residue deposit. Clean when necessary with mild soap or
alcohol. Always spot test the cleaner to make sure it does not damage the surface.
Once a year or as needed, clean the interior of the unit (wall and motor plate), with mild non-abrasive soap. It is recommended
to use products that are environmentally friendly.
CAUTION: Under no circumstance should water be sprayed or splashed onto the product.
ULTRAVIOLETS: UVC
The UVC (254 nm) wavelengths produced by Sanuvox UV units and systems are the same as the ultraviolets produced by the
Sun. The UVC attacks the micro-organisms on a molecular level deactivating the contaminants. Unlike conventional UV lamps
on the market, Sanuvox UV units and systems use a patented process designed to deliver the maximum UV dosage to the
moving airstream or surface.
CAUTION: Never expose eyes or skin to an operating UV lamp.
STORAGE
The Sanuvair
®
S300 unit is fixed installation and therefore, requires no specific storage.
ELECTRICAL RATINGS, POWER CONSUMPTION & AVAILABLE VOLTAGE
The product is rated at 120/240 VAC, 50/60 Hz and 48 W.
See product label to confirm power consumption of your specific unit or system.
NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CUSTOMER SERVICE FIRST OR SEE YOUR WARRANTY.
DO NOT RETURN THE PRODUCT TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE
PRODUCT OR TAMPER WITH ITS COMPONENTS WITHOUT CONTACTING CUSTOMER SERVICE FIRST. DOING SO
MAY VOID YOUR WARRANTY AND CAUSE PERSONAL INJURY OR DAMAGE TO THE PRODUCT.
TROUBLESHOOTING
If your product is not working properly, refer to the following.
Problem
Possible Cause
Solution
Unit doesn’t turn ON.
- The power cord is not fully inserted in
the unit’s connector.
- There is no power to the electrical
outlet.
- The door interlock switch is operating.
- Power cord is damaged.
- Test the outlet to make sure there is
power by plugging in another electrical
appliance.
- Check the power cord for damage and
replace if damaged.
Unit operates only on one speed.
- There are loose wires inside electrical
box.
-
Contact your contractor.
Unit vibrates (balancing weight).
- An excessive dust build-up or missing
on the impeller wheel.
- Check for excessive dust build-up or
missing on the impeller wheel.
- Clean the interior of the unit (wall and
motor plate)
Contact your contractor for all your needs in terms of replacement parts:
power cord, motor, ventilator, ballast, UV lamp, etc.