10
Instruction Manual for Sanuvair
®
S300
1-888-726-8869
www.sanuvox.com
OPERATION
How to Operate your Product
The Sanuvair
®
S300 is an automatic unit: once it’s installed and plugged in, simply press the power switch to turn it ON. Wait
approximately 40 seconds for the startup phase to be done and enjoy clean air in your home!
To access the door interlock switch and the speed selection switch, open the filters and motor access door at the front of the unit.
Opening the latch on the right side of the unit will permit the door to swing open. The safety door interlock switch cut the power
to the motor. If necessary the door can be removed from the cabinet hinges by holding the top part of the door with one hand
and gently tapping on the bottom edge of the door with your hand to release the door from its hinges.
LED Status Display
Door Interlock Switch
Inside the unit
Speed Selection Switch
||
Ventilation speed, maximum
300 CFM
|
Ventilation speed, normal
220 CFM
How to Select Speed
The Sanuvair
®
S300 features two speeds of operation.
The speed selection switch is located inside the unit, on the front of the motor assembly.
It is recommended that the unit be operated at its highest speed at all time to maximize the benefits of the air purifier.
How to Read the LED Status Display
The Sanuvair
®
S300’s LED Status Display will give you real time status update about your
unit and its lamp.
Normal Operation
BALLAST ON, RED:
Ballast in operation, "Default Mode".
UV ON, AMBER:
Lamp in operation, "Default Mode".
