9
Instruction Manual for Sanuvair
®
S300
1-888-726-8869
www.sanuvox.com
3. Secure the unit to the wall (vertically or horizontally) or to the ceiling,
using suitable wall plugs and screws (not included). Make sure you
have a power outlet nearby to plug the unit into.
CAUTION:
Your S300 unit is bulky. Make sure that there are
always
two people to lift and handle it to avoid any injuries.
4. Then
place a 8" collar (sold separately)
over the opening you made
at the top to later connect rigid pipe or 8" flexible pipe.
Do the same for the air outlet under the unit.
5. Install your 8"
(rigid in aluminum or galvanized or aluminized flexible)
pipes.
Your new SANUVAIR
®
S300
is now ready to operate!
STEP 3
STEP 4
STEP 5
Step by Step Installation | Added Ducts
1. Using wire cutters, cut the small metal pieces
supporting the pre-cut
8" round opening at the top of the unit and, do the same with the one
undererneath. You will need to use a blade to cut the paper on top as
well as the sound-absorbing material under the unit.
CAUTION:
The metal is sharp. Gently remove this part to avoid
injuring yourself.
2. Use one of the 17" mounting angles and secure it along the rear edge
of the unit top by using the screws already in place. Then, secure the
second mounting angle along the rear edge at the bottom of the unit.
STEP 1
STEP 2