User manual
SNC-8322I / SNC-8322HO
_________________________________________________________________________________
- 13 -
2.2 Connect to power
To connect the camera to power, please use a 24 V AC power adapter with open cable ends
and the included power plug (also see chapter „1.4 Connectors“).
Connect the Ethernet cable to the cameras PoE port and plug the other end of the cable into
a PoE switch.
Note:
When using PoE, please only use a PoE + power adapter (IEEE 802.3at) which has at least
the same power consumption as the speed dome.
2.3 Connect Ethernet cable
The use of a CAT5 Ethernet cable is recommended for network connections. To have the
best transmission quality, the cable length should not exceed 100 m. Connect one end of the
Ethernet cable to the RJ-45 connector of the IP camera and the other end of the cable to the
network switch or PC.
Note:
In some cases you may need to use an Ethernet crossover cable when connecting the IP
camera directly to the PC.
Check the status of the link indicator and activity indicator LEDs. If the LEDs are unlit, please
check the LAN connection.
Green: Indicates network connection.
Orange: Light flashes for network activity indication.
Pin
Description
1
AC 24_1
2
GND
3
AC 24_2
AUTO
IRIS
1
2
3
4
I/O
NETWORK
DC12V
LINE
LINE IN
MIC IN
OUT
VIDEO
DC
RESET
