User manual
SNC-8322I / SNC-8322HO
_________________________________________________________________________________
- 15 -
3. Software installations
3.1 Access the camera: Install SanWebAX software
For initial access to the IP camera, the client program
“SanWebAX” will automatically be
installed on your PC when connecting to the IP camera.
If the web browser doesn
’t allow SanWebAX installation, please check the Internet security
settings or ActiveX controls and plug-in settings
(also see chapter “Appendix: Internet
security setup”) to continue the process.
The information bar (just below the URL bar) may come out and ask for permission to install
the ActiveX Control for displaying video in browser. Right-click on the information bar and
select <Install ActiveX Control
…> to allow the installation.
3.2 Software/firmware update
We aim at delivering our products with the most up-to-date firmware version.
However, it might be possible that a new firmware version becomes available between the
date of production and the date of delivery.
Hence we recommend to check whether an updated version is available before you install
and start the device.
The latest firmware versions for SANTEC products are available at:
Note:
Prior to installing a new firmware version, please check if this is really required for your
device. If you use a camera, the currently installed firmware version number is displayed
underneath the live view picture.
We do not assume any liability for any device failures that might occur due to improper
firmware update installations.
http://80.149.80.149/adm
User name:
firmware
Password:
santec
