User manual
SNC-8322I / SNC-8322HO
_________________________________________________________________________________
- 12 -
2. Camera installation
2.1 Ceiling mount (surface mount with supplied bracket)
1. When taking the speed dome out of the box, do not lift it by its housing top. The top is
not screwed tight and may come off when taking the dome out of the box, hence the
entire dome may fall down.
2. Take off the housing top and remove the transport
securing devices:
a. adhesive tape on lens
b. filling material on housing top’s inner side
c. lens cover
3. Drill 4 holes in the desired location on the ceiling and
insert the included anchors. You may use the bracket
as a drilling hole scheme. Please ensure that the
ceiling is strong enough to carry the weight of the
speed dome.
4. Lead the cables from the ceiling through the bracket.
5. Screw the bracket to the ceiling using the included screws. If these screws are not
suitable for your installation, please use other appropriate screws.
6. Connect the cables to the speed dome.
If you don’t use PoE, a power adapter with
open cable ends is required (not included in the delivery). Use the included power
plug to connect the camera with the power adapter. Benutzen Sie den beiliegenden
Stromstecker, um die Kamera mit dem Netzteil zu verbinden. Connect the LAN cable
to the camera.
Note: The built-in heater of camera SNC-8322HO only operates when 24 V AC is
used (and not PoE).
7. Mount the speed dome to the ceiling bracket. Turn the dome a bit until the fixing
screw is in the right position and you can screw it tight to the bracket.
8. Put the housing top back on and screw it tight
