User manual
SNC-8322I / SNC-8322HO
_________________________________________________________________________________
- 81 -
2.5.3 Auto Pan
The auto pan setting can be found under this path:
PTZ > Auto Pan
Auto pan setting:
Select an auto pan path (=auto pan number) from the drop-down list. Overall, 4 auto
pans can be defined.
Left-click into the live picture.
The cursor turns into a red arrow/dot. You can now move the picture to the desired
position.
If required, you can adjust the picture by clicking on the zoom and focus buttons.
Click on „Start point: Set“ to start the cruise.
Click on „End point: Set“ to end the cruise.
Enter the auto pan speed from 0 to 3: 0 = slow; 3 = fast.
Enter the auto pan direction: left or right.
Auto pan run list:
To run a specific auto pan, select the desired auto pan path (= auto pan number) from the
drop-down list.
To display the auto pan as full screen, right-
click in the live picture and select “Fullscreen”. By
double-clicking in the full screen picture, you return to the regular view.
