User manual
SanStore-4HDX, SanStore-8HDX, SanStore-16HDXS
_________________________________________________________________________________
- 46 -
7.2.2 Monitor
Here you can make the following adjustments:
Alarm pop-up mode:
If set to „On“, an alarm input will cause the associated channel to be displayed in full
screen.
Alarm pop-up dwell:
Determine how log the full screen pop-up is to be displayed after an alarm has
occurred (3-60 sec).
Motion pop-up mode:
If set ot „On“, motion detection will cause the associated channel to be displayed in
full screen.
Motion pop-up dwell:
Determine how log the full screen pop-up is to be displayed after a motion has
occurred (3-60 sec).
Note: If the motion continues longer, the full screen is displayed constantly.
Video output resolution:
You can configure the video output resolution.
Then click on “OK.
Note on connected monitor:
It is recommended to connect a 16:9 monitor with 1080p resolution to ensure a proper
image format.
By factory default, the recorder comes with 1280 x 1024 resolution to also enable a
proper image on a 4:3 monitor. Please adjust the settings (if required) to 1080p in the
monitor menu of the recorder.
VGA horizontal/vertical offset:
You can change the horizontal/vertical postion of the image. It is recommended to
keep the default settings and only change them if absolutely required.