User manual
SanStore-4HDX, SanStore-8HDX, SanStore-16HDXS
_________________________________________________________________________________
- 42 -
You can define individual areas for motion detection by left-clicking in the desired grid cell(s).
This cell is hence enabled and displayed in grey. If you click again the the cell(s), they will be
disabled again.
To quickly select or deselect the entire image, thus all cells in the grid, right-click into the
image. A little motion menu is brought up:
Click on „Select all“ or „Deselect all“ to enable or disable the entire
grid.
You may also press and hold the left mouse button to drag across
several cells to mark them.
Then click “Select all” or “Deselect all”.
Finally, click on
„Save & Exit“ to save the settings for motion
detection and to return to the main menu.
Click on „Cancel“ to return to the main menu without saving the
changes.