User manual
SanStore-4HDX, SanStore-8HDX, SanStore-16HDXS
_________________________________________________________________________________
- 15 -
4. Switching the recorder on and off
4.1 Switching on
Verify that the camera(s) are properly connected to the recorder and that they are
switched on.
Connect one or several monitors to the recorder (VGA, HDMI, spot monitor BNC).
Connect a mouse to the re
corder‘s USB port on the front panel.
Connect the recorder to power. Use the power-on button on the recorder rear to
switch it on. The recorder boots, along with a beep sound.
When the recorder boots, the following screen is displayed:
Note on connected monitor:
It is recommended to connect a 16:9 monitor with 1080p resolution to ensure a proper image
format.
By factory default, the recorder comes with 1280 x 1024 resolution to also enable a proper
image on a 4:3 monitor. Please adjust the settings (if required) to 1080p in the monitor menu
of the recorder (also see chapter 7.2.2).
Once the recorder has booted, the scheduled recordings start automatically provided they
have properly been scheduled.
The recorder is now ready to use. The following split-view screen of the live view is
displayed.
The screenshot shown above is for 16 channels. Respective views apply for 4 and 8
channels.