User manual
SanStore-4HDX, SanStore-8HDX, SanStore-16HDXS
_________________________________________________________________________________
- 59 -
7.5.2 Relay output
The following settings can be adjusted:
Relay out:
Define the relay for the alarm output.
Operation:
Enable/disable the alarm output.
Mode:
o
Transparent: Keep the relay output until the event trigger has stopped.
o
Latched: Keep the relay output for the defined duration.
Duration:
If the alarm output mode is set to „Latched“, you can configure the duration for the
relay output.
HDD event:
If enabled, the relay output will be started in case of a HDD event.
Sensor / video loss / motion:
Tick the desired box per channel if a relay output should be activated.
