User manual
SanStore-4HDX, SanStore-8HDX, SanStore-16HDXS
_________________________________________________________________________________
- 11 -
1. Power on/off
2. e-SATA HDD connection
3. VGA main monitor connections (15 pin)
4. 4x audio input cinch
5. Power connection 12 V DC
6. Alarm inputs, RS-485, relay output:
4, 8 or 16 alarm inputs (depending on recorder model)
RS-485 signal: G = Ground, D+ = RX/TX+ signal, D- = RX/TX- signal
Relay output: Normal Open (NO)
7. RJ-45 Ethernet port:
Connect the recorder with the network
8. Spot monitor output (BNC)
9. Speaker output (cinch)
10. HDMI main monitor connection
11. 4, 8 or 16 camera inputs (to connect HD-SDI or analogue cameras)
Note on connected monitor:
It is recommended to connect a 16:9 monitor with 1080p resolution to ensure a proper image
format.
By factory default, the recorder comes with 1280 x 1024 resolution to also enable a proper
image on a 4:3 monitor. Please adjust the settings (if required) to 1080p in the monitor menu
of the recorder (also see chapter 7.2.2).