04-2017
CAFE RACER
Manual for technical
35 / 56-EN
EN
-
ndo the two screws (4) and remove the cover (5)
of the electronic board.
- Disconnect all connectors of board (6), unscrew
the three flanged nuts (7) and remove the board.
- Connect the connector mar ed “AT” to connector
(2), and the connector mar ed “BT” to connector
(3).
7.22 Replacing the electrical panel components
to perform this check, the electrical con-
nection must be inserted, therefore the
electrical panel components (4) are pow-
ered up.
operate with utmost care.
-
In order to chec proper operation of the electrical
panel components, pull the panel out and connect
the relevant extension, supplied upon request.
- Remove the lower front panel as described in the
relevant paragraph.
- Pull out the electrical panel as described in the rel
-
ative paragraph.
- Insert the extension (1) in place of the panel into
the machine.
PRELIMINARY REV 00
4
5
4
7
1
7
6
Bt
At
At
Bt
3
2
4
