CAFE RACER
04-2017
Manual for technical
34 / 56-EN
EN
7.20 Replacing the pre-infusion expansion board
- Remove the cup heating plate and the L side
panel as described in the relevant paragraphs.
-
se a long Phillips screwdriver (1) to unscrew the
fastening screw of the expansion board
- Disconnect the connectors (2).
- Pull out the board (3) and disconnect the rear con
-
nector (4).
mark the position of connectors so that
they are inserted in the relevant seat
when the board is reassembled.
7.21 Replacing the electronic board
- Remove the L side panel as described in the rel
-
evant paragraph.
-
nscrew the two screws (1) and move the LED
plate (2) with the relevant brac et (3).
PRELIMINARY REV 00
3
2
1
2
4
3
4
