04-2017
CAFE RACER
Manual for technical
29 / 56-EN
EN
7.13 Replacing the cooling cycle solenoid valve
- Remove the cup heating plate as described in the
relevant paragraph.
- Disconnect the Faston connectors (1).
-
nscrew the nut (2) and remove the coil (3).
-
ndo the four screws (4) and remove the core (5).
- When reassembling, pay attention to properly con-
nect the Faston connectors to the coil.
When reassembling the core, pay atten-
tion to properly reassemble the gasket,
core and spring.
7.14 Replacing the purge solenoid valve.
- Remove the R side panel as described in the rel
-
ative paragraph.
-
nscrew the two screws (1) and move the LED
plate (2) with the relevant brac et (3).
PRELIMINARY REV 00
1
2
3
4
5
1
3
2
