04-2017
CAFE RACER
Manual for technical
25 / 56-EN
EN
7.8 Replacing the pump motor
- Remove the cup heating plate and the L side
panel as described in the relevant paragraphs.
- Remove the pump as described in the relevant
paragraph without disconnecting the inta e and
delivery pipes.
-
nscrew the two screws (1) and move the LED
plate (2) with the relevant brac et (3).
- Loosen the screws (4) fastening the pump to the
plate (5).
- Disconnect the two pump connectors (6) and (7).
- Lift the pump motor (8) detaching it from the plate
(5) and remove it.
- Reassemble everything in reverse order of remov
-
al, paying attention to connect connector (7) to the
3-way connector below it; see the wiring diagram.
PRELIMINARY REV 00
1
2
4
5
4
6
7
5
8
3
