04-2017
CAFE RACER
Manual for technical
45 / 56-EN
EN
8. PRoGRAmmING By tHE tEcH-
NIcIAN
- To access the programming mode, bring the ma
-
chine to the electronic OFF and eep the central
button (1) pressed, then press button (2), the dis
-
play shows “oFF” and button (2) flashes.
- Press and eep pressed button (1) until PASS
-
WORD appears on the display (3); press button
(1) five times to enter the programming mode; the
default password is “11111”.
Programming by the technician follows drill-down
screens with the various programming sequences,
therefore scroll through the sequences and confirm
the set data until reaching the desired sequence to
be modified.
The programming sequences are:
- Language
- Name
- Service tel.
- Number of units
- Chrono function
- Inta e coffee
- Watt
- Steam pressure transducer
- Pump pressure offset
- Programming doses
- Four doses
- Displacement counter offset 1
- Displacement counter offset 2
- Displacement counter offset 3
- Sensitivity
- Maintenance cycles
- Temperature
- Boiler temperature
- Unit 1 temperature offset
- Unit 2 temperature offset
- Unit 3 temperature offset
- Inactivity time
- Rest temperature offset
- Filling timeout
- Water filter
- Number of credits
- Cooling cycle
- Password change
PRELIMINARY REV 00
2
1
3
