CAFE RACER
04-2017
Manual for technical
16 / 56-EN
EN
6. ADJuStmENtS AND RESEtS
6.1 Adjusting mixed water
- Act on the screw (1) of the mixed water solenoid
valve located in the left rear lower part, to ad ust
the amount of cold water that is mixed with hot
water during water dispensing.
6.2 Bleeding the air from the circuit
- Press button (1), located in the right front lower
part, to energise the coils and bleed any air from
the circuit.
-
eep the button pressed until only water comes
out of the drain, not water mixed with air.
6.3 Resetting the service boiler safety thermo-
stat
- Remove the R side panel as described in the rel
-
ative paragraph.
- Press the safety thermostat (1) to reset it.
If the thermostat trips again when
the machine is restarted after re-
setting the safety thermostat,
check the boiler heating elements
and the other thermostats in the
machine.
PRELIMINARY REV 00
1
1
1
