Sanosil Q-Jet CT20 Operating Manual Download Page 7 | Manualshive

Page: 7 / 32

background image

Operating Manual Q-Jet CT20

© Sanosil

7/32

DANGER

Risk of injury/electric shock

This device operates with electric current of potentially lethal voltage/amperage. Always observe
the usual safety regulations when handling electrical equipment.

Sanosil Ltd is not responsible for any injury or damage caused by improper use of the device.

2.5 Authorised personnel

The device must only be used by adults who have been carefully instructed in how to operate it and who are
well informed about the potential dangers and risks when using the device. Users must always have a copy of
the user manual available while operating the device and must have read and understood all specific infor-
mation on the label of the Sanosil disinfectant used.

2.6 Liability disclaimer

Sanosil accepts no liability for damages or warranty claims if:

•

The product is used for a purpose other than that specified in this user manual.

•

Regulations, standards or instructions in this user manual are not observed.

•

The product is modified or altered in any way.

•

The product is not repaired by an authorised dealer and is operated with spare parts that are not genuine
Sanosil Ltd. parts.

•

The product is used despite obvious safety defects or identifiable damage.

•

The product has been subjected to mechanical shocks or dropped.

•

Accessories are used that are not included in the scope of delivery or expressly approved by Sanosil Ltd.

«
...
5
6
7
8
9
...
»

Summary of Contents for Q-Jet CT20

































Reviews:

No comments

Related manuals for Q-Jet CT20

Brand: GALLERY Pages: 18

Brand: Latchways Pages: 80

Brand: Kapriol Pages: 28

Brand: Obdstar Pages: 10

Brand: DANLERS Pages: 2

Brand: Haas Automation Pages: 26

Brand: Parker Pages: 39

Brand: HANYOUNG NUX Pages: 2

Pressure Governor

Brand: Waterous Pages: 53

Brand: Landi Renzo Pages: 16

Brand: IBM Pages: 163

Brand: Labelmate Pages: 61

Brand: Labconco Pages: 62

Brand: Sagola Pages: 62

Brand: Valcom Pages: 6

Brand: Vaisala Pages: 60

Brand: Yamaha Pages: 29

RZN 43-E Series

Brand: D+H Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands