Sanosil Q-Jet CT20 Operating Manual Download Page 4 | Manualshive

Page: 4 / 32

background image

Operating Manual Q-Jet CT20

© Sanosil

4/32

1. Use of symbols

The following symbols are used in this manual or on the device:

DANGER

High risk!

Non-compliance can lead to death or serious injury!

ATTENTION

Medium risk!

Non-compliance can lead to serious injury!

CAUTION

Low risk!

Non-compliance can lead to moderate or minor injuries!

NOTE

Non-compliance may damage the device.

Offers advice on how to operate the device correctly.

2 Safety

DANGER

For all users of the device, provide comprehensive instructions on proper operation, the intended
use and the associated risks. Make sure that this manual has been read and understood by all us-
ers of the device. Make sure that this manual is always available to the users of the device.

2.1 Intended use

The device is a nebuliser for indoor applications using exclusively Sanosil disinfectants with a maximum hydro-
gen peroxide content of 7.5%. Its purpose is to transform the disinfecting liquid used into minute particles and
to nebulise them in a room, which then results in uniform disinfection of all uncovered surfaces in the room (3D
disinfection).

The device is intended for use in hospitals, clinics and on public transport, etc. as well as in residential, commer-
cial and industrial areas. This type of disinfection is an additional measure after regular cleaning and disinfection
of room surfaces. In each case, the pre-cleaning protocol is defined by the respective healthcare organisations.
Make sure the surfaces are dry before nebulising to maximise the effect.

ATTENTION

Risk of damage!

This device nebulises chemical substances! The area to be disinfected must only contain items nec-
essary for operation of the device. Objects consisting of sensitive organic materials, especially an-
tiques, paintings and valuable artefacts must be removed.

«
...
2
3
4
5
6
...
»

Summary of Contents for Q-Jet CT20

































Reviews:

No comments

Related manuals for Q-Jet CT20

Brand: Ecco Pages: 4

Brand: JD Squared Pages: 15

Brand: DAPAudio Pages: 16

Brand: 3M Pages: 28

Brand: ParaBody Pages: 4

Brand: Nitecore Pages: 4

Brand: OceanSat Pages: 85

Brand: Rane Pages: 38

Brand: Kartsana Pages: 36

Brand: Yamaha Pages: 16

Brand: York Pages: 16

i.Profiler plus

Brand: Zeiss Pages: 66

Brand: B. Braun Pages: 40

Brand: B. Braun Pages: 4

Brand: Ekinex Pages: 37

Brand: HMS Pages: 36

Brand: ATD Tools Pages: 7

SPLICE-500 MKII

Brand: Serpent Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands