Sanosil Q-Jet CT20 Operating Manual Download Page 6 | Manualshive

Page: 6 / 32

background image

Operating Manual Q-Jet CT20

© Sanosil

6/32

ATTENTION

Health risk / material damage

This device nebulises chemical substances! Hydrogen peroxide concentrations in the air above 1
ppm may irritate eyes and respiratory tract / adversely affect health.

The use of chemicals other than those intended or the incorrect positioning and use of the device
may be harmful to health and/or result in property damage.

Sanosil Q-Jet CT-20 (device)

•

Keep the device out of the reach of children.

•

Read the operating manual and safety instructions carefully before using the device for the first time.

•

Only use the device as specified.

•

Although the device is easy to operate, it must only be used by trained personnel.

•

Caution: Electric shock! Do not connect the device to the power supply when parts of it are still wet.

•

Only use the power cable supplied by Sanosil AG.

•

No liquids must be allowed to enter the device. If this nevertheless occurs, disconnect the device from the
mains immediately, let the device dry completely and then test all its functions.

•

Do not overfill the tank or tip the device.

•

Disconnect the device from the power circuit before moving it or opening it to connect a bidon.

•

Position the device on a firm surface so that it does not roll or move.

•

Do not tip the device on its side until the tank has been removed, the pipes have been blown out and the
device is completely dry.

•

Protect the device from sharp impacts and shocks.

•

Risk of burns! The device may heat up during use.

•

Observe specific warnings on the label of the disinfectant.

•

Place the unit on a stable, level, dust-free, non-slip, horizontal surface with a load-bearing capacity suitable
for its weight.

•

Store the device upright in a safe, dry place. Do not store any objects on the device.

«
...
4
5
6
7
8
...
»

Summary of Contents for Q-Jet CT20

































Reviews:

No comments

Related manuals for Q-Jet CT20

Brand: ABB Pages: 6

Brand: ABB Pages: 18

Brand: R-Tech Pages: 3

Brand: GE Pages: 242

Brand: GE Pages: 24

Brand: Balanced Body Pages: 3

Brand: SAMCHULLY Pages: 48

Brand: h/p/cosmos Pages: 81

Brand: Haag-Streit Pages: 18

Brand: Haag-Streit Pages: 20

Brand: V-TEK Pages: 2

Brand: V-TEK Pages: 112

Brand: IBEX Pages: 4

Saturn 2000 GC/MS

Brand: Varian Pages: 9

Brand: MadLab Pages: 7

Brand: Lutron Electronics Pages: 10

Brand: Mikrona Pages: 12

Brand: Mark Fitness Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands