Helpful H
i
nts
Closed Hours/Shut-Down
If the machine is turned off during closed hours, fol-
low these steps when resuming operation:
NOTE: NEVER POUR FROZEN PRODUCT INTO
THE MIX PAN. LET IT MELT FIRST.
1
.
Set the dasher switch to the
"ON"
position for
one to two minutes.
2. Dispense two quarts of product and pour it back
into the mix pan. This acts as a mixing process to
eliminate any overnight separation.
3. Set all switches to the
"ON"
position and resume
operation.
Drip Tray & Drip Tray Insert
These parts should be removed daily and cleaned
to remove residue.
Filling
Always fill the machine at the start of each day.
Front Plate
This component is the plastic device from which the
product is dispensed. It is designed and made for
strength and durability. However, through improper
use, it can be damaged. Use the following informa-
tion for proper care.
•
Do not lubricate the large
o-ring
on the rear of
the front plate. If lubricated, it will not seal prop-
erly and product will leak.
•
Do not over tighten the knobs.
•
Always tighten front plate knobs evenly. Do not
attempt to turn one knob all the way down and
then the other. This will bind the front plate and
result in breakage.
•
Improper installation of the dasher front support
can cause breakage. The dasher front support
must be properly seated in the dasher before
installing the front plate. If improperly installed,
subsequent tightening of the knobs will break
the front plate.
•
Do not attempt to wash the front plate or any
other machine components in a dishwasher.
11
